- Air Compressors
- Air-N-Arc Power Systems
- Aviation Wheel Chocks
- Commercial Backup Cameras
-
Crane Attachments
- HPX Drive
- HPX Drive - Heavy Duty
- HPX Drive Shells
- Augers
- Barrier Lifters
- Brick Grapples
- Clamshell Buckets
- Drywall Forks
- Hay Grapples
- Intermercato Rotators
- Kinshofer Nox Tilt Rotator
- Kinshofer Rotators
- Railroad Grapples
- Rock Grapples
- Steel Plate Grapples
- Timber Grapples / Logging Grapples
- Trash and Refuse Grapples
- Kwikbels and Strikers
- Crane Forks
- Equipment Locks
- Fire and Rescue
- Fuel Transfer Pumps
- Goodall Parts
- Goodall Power Centers
- Ground Protection Mats
-
Hardware for Service Trucks
- Aluminum Castings
- Bar Locks / Cam Locks
- Compartment Latches
- Chest Handles
- D-Ring Handles
- Door Holds and Door Hold Backs
- Folding Footsteps and Handles
- Gas Struts and Springs
- Grab Handles and Rails
- Hinges
- Hood Catches / Hood Latches
- L-Handles
- Lock Cylinders and Keys
- Paddle Handles
- Push Button Handles
- Slam Latches
- Specialty Latches
- Spring Latches
- T-Handles
- Weather Strip - Trim
- Hazmat Placards
- Helper Springs for Trucks
- Hydraulic Drive Welder - Generators
- Jobsite Security
- John Dow Parts
- Jump Start Equipment
- Kinshofer Parts
- Outrigger Pads
- Power Inverters
- Road Construction Signs
- Safety Equipment - Personal
- Specials
- Truck Safety Equipment
- Utility Body Bed Covers
- Wheel Chocks
- Winches and Hoists
- Work Truck Accessories
| SKU | WAR26502 |
| Model | WARN-26502 - Warn M8000 Winch |
| Manufacturer | Warn |
| In Depth | Warn 26502 Winch - Warn M8000 SELF-RECOVERY WINCH Compact. Tough. An outstanding value. Available with a roller or hawse fairlead and your choice of 80 or 100' of 5/16" diameter wire rope, the Warn M8000 Winch pulls a fast 8ft. per minute at rated load. The 4.8 hp Series Wound motor delivers big torque and power. Includes an all-weather remote control on a 12' (3.7m) lead. M8000 SPECS/PART NUMBERS Part Number: PN 20910 (12V DC, CE) 80' wire rope and hawse fairlead Part Number: PN 26502 (12V DC, CE) 100' wire rope and roller fairlead Part Number: PN 265032 (24V DC, CE) 100' wire rope, roller fairlead, safety hook and thimble Rated Line Pull: 8000 lbs. (3630 kgs.) single-line Motor: 12V 4.8 hp, 24V 2.1 hp, Series WoundTM Remote Control: Remote switch, 12' (3.7m) lead Geartrain: 3-Stage Planetary Gear Ratio: 216:1 Lubrication: Aeroshell #17 Clutch (freespooling): Sliding Ring Gear Brake: Automatic Direct Drive Cone Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) Weight: 74 lbs. (34 kgs.) Wire Rope: 80', 5/16" diam. (24m, 8mm diam.) or 100', 5/16" diam. (30m, 8mm diam.) Fairlead for PN 20910: Hawse Fairlead for PN 26502, 265022, 265032: Roller Recommended Battery: 650 CCA minimum for winching Battery Leads: 2 gauge, 72" (1.83m) Finish: Argent Gray Powder Coat Nuts/Bolts: PN 39625 |
