Skip to Store Area:

Military Sales | Municipal Sales | Business Sales | Why Work With The Best

Work Truck Equipment and Hardware For The Military and Municipalities

You Are Here:
Search Site

Fire Truck Wheel Chocks - AT2512-RP-Y

Zoom Out
Zoom In

More Views

Click on above image to view full picture in a popup

Fire Truck Wheel Chocks - 15.5 Inch Urethane Wheel Chock

Model#: Fire Truck Wheel Chocks - AT2512-RP-Y

Regular: $147.50

Now: $132.75

SKU#: WHEELCHOCK-AT2512-RP-Y

Add Items to Cart

AT2512-RP-Y Fire Truck Wheel Chocks - 15.5" Urethane Wheel Chock


Wheel chocks designed for fire trucks with a wheel diameter of up to 32".
These tough, damage resistant polyurethane wheel chocks are resistant to oils, fuels and solvents.
Roadblocks 2512 Series All-Terrain Urethane Wheel Chocks are specifically designed for use on fire equipment. They comply with NFPA 1901-03 and meet SAE-J348 standard for up to 32 inch wheel diameters. They also feature anti-slip rubber traction pads. For added safety and convenience, these wheel chocks incorporate a molded carrying handle and safety colors for easy identification.
Mounting brackets are available for these wheel chocks.


  • Wheel Chock with Rubber Base
  • Bright Yellow Color
  • Length- 15.5 in.
  • Width- 8.5 in.
  • Height- 8.25 in.


    • Fire Truck Wheel Chocks - 15.5" Urethane Wheel Chock AT2512-RP-Y


    RATED FOR: Fire trucks with up to 32" wheel diameter.

  • Bright Yellow Color
  • Complies with NFPA 1901-03.
  • Meets SAE-J348 standard.
  • Third party tested for compliance.
  • Tough polyurethane construction.
  • Resistant to oils, fuels and solvents.
  • Recessed carrying handle.
  • Safety color visibility.
  • Rubber pad for traction
    SKU WHEELCHOCK-AT2512-RP-Y
    Model Fire Truck Wheel Chocks - AT2512-RP-Y
    Manufacturer Checkers Industrial
    Specifications NFPA MOUNTING REQUIREMENTS
    NFPA STANDARDS REQUIRE WHEEL CHOCKS TO BE MOUNTED ON FIRE APPARATUS BEFORE BEING PLACED INTO SERVICE.
    Two Chocks must be mounted and readily accessible per NFPA 1901 (Section 7-2), 1902 (Section 7-2), and 1903 (Section 6-1).
    Warnings - Notices
  • Improper use may result in product failure.
  • Select wheel chock according to vehicle type and size.
  • Always use in pairs and on firm surfaces.
  • Multiple pairs may be required in extreme conditions.
  • Chock in direction of grade.
  • Chock both sides of wheel if direction of grade is undetermined.
  • Use only after parking brake is applied and tested.
  • Center chocks snugly and squarely against tread of each wheel.
  • Always test chocks to insure they meet your specific requirements.
  • Do not drive over wheel chocks.


    OSHA Guidelines
    1910.178 (k) Trucks and railroad cars. (1) the brakes of highway trucks shall be set and wheel chocks placed under the rear wheels to prevent the trucks from rolling while they are boarded with powered industrial trucks.
    		•