Skip to Store Area:

Work Truck Equipment and Hardware For The Military and Municipalities

Two-Mode Fast Idle Speed Control For Ford and GM With Automatic Transmissions - ETM52-QVM

Zoom Out
Zoom In

More Views

Click on above image to view full picture in a popup

Fast Idle Speed Control For Ford and GM With Automatic Transmissions - ETM52-QVM

Model#: InPower ETM52

$190.00

SKU#: IP-ETM52-QVM

Add Items to Cart

InPower ETM52-QVM Two-Mode Fast Idle Speed Control For Ford and GM With Automatic Transmissions



  • Supports Ford and GM chassis
  • Automatic battery charge protect mode
  • Fixed speed high idle mode
  • Diagnostic LED status indicators
  • Built-In safety interlocks
  • Wiring harness with Amp connector
  • Compact size
  • Easy to install


  • InPower ETM52-QVM Two-Mode Fast Idle Speed Control For Ford and GM With Automatic Transmissions


    he ETM52-QVM provides basic high idle functions for Ford and GM vehicles, similar to the ETM52. The ETM52-QVM differs in that the RPM and activation/deactivation battery voltage settings for Ford gas applications meet the Ford QVM requirements for gas ambulance prep packages.
    SKU IP-ETM52-QVM
    Model InPower ETM52
    Manufacturer InPower
    In Depth

    InPower ETM52-QVM Two-Mode Fast Idle Speed Control For Ford and GM With Automatic Transmissions


    Please see the description for the difference between the ETM52 and the ETM52-QVM
    The ETM-52 provides basic high idle functions for GM and Ford vehicles. Two modes of fast idle control are provided: Fixed Speed and Automatic. Fixed Speed elevates the engine speed to a fixed rpm value. Depending on the chassis, available fixed fast idle speeds are 1200, 1460, or 1500 rpm. These speeds are set up at installation. Automatic increases the engine speed to the fixed speed rpm value when the battery voltage indicates a low charging condition. Normal idle speed is resumed when the battery voltage indicates a charged condition.

    The ETM52 includes Chassis Ready Conditions safeguards that must be satisfied before the engine speed can be increased. These enablers include: transmission in Park, parking brake set, vehicle stationary (no speed), foot off service brake, and foot off accelerator. Seven LED indicators are located on the ETM52 module to display the selected operating mode and the safety Chassis Ready Conditions. Wiring terminations utilize an Amp 12-pin Mate-N-Lok connector. A wiring harness is included that contains a OBD-II plug and blunt-cut wires for connecting to chassis functions and the customer provided Fast Idle switch.
    Specifications

    InPower ETM52-QVM Two-Mode Fast Idle Speed Control For Ford and GM With Automatic Transmissions


    Vehicles supported include:

  • GM (Chevy & GMC)
  • 2008-2010 Suburban/Tahoe
  • 2008-2010 Express/Savana
  • 2008-2010 Silvarado/Serra
  • 2008-2009 Topkick/Kodiac
  • Ford
  • 2008-2010 F250-F550
  • 2009-2010 E250-F350